Fluor Liquid One Way F-RAGE LQ200 -2°...-10°C (28°…14°F) 50 ml

Gel coating for all snow types, in mild winter temperatures. When the product is used on top of a fluor powder or Nappi, apply on brushed skis that are clean from the brushing dust. Spread the gel to the base, let it dry at room temperature, rub with a hand or roto cork, and cool the skis outside. In wet conditions, start brushing with a nylon brush and finish off with a steel, brass or powder brush. When the snow is “light”, start with a few steel brush strokes, and continue with a nylon brush firmly. In wet conditions with surface suction, finish off with a brass or steel brush. On top of non or low fluor waxes: Spread a generous (and an even) layer of gel, and leave it to dry until the gel turns complete white. Set the waxing iron temperature to 120⁰…135⁰C. 3-4 passes with an iron, from top to tail. Cool down for a few minutes, add another thin layer, let it dry and rub with a hand or roto cork. Cool down completely and brush as above.