- Kun online

Chrono Test is a programmable chronometer with microprocessor, ideal for testing the glide of skis and ski waxes.
GETTING STARTED
Position the two refelctors on a slight downhill at a distance between 20-80 cm. from the track. Fix Cрrono Test to your leg, and turn “on”. The sequence movement for testing is completely automatic; when running through the first reflector (start) the chronometer will start counting, and at the second reflector (stop) the display will indicate the time in seconds and thousands of seconds. If you have programmed the chronometer inserting the information regarding the distance in meters between the two reflectors, the display will visualize in time and also in km/h. At the next run,the location and new measurement will automatically proceed. It is possible , however, at any time to move from the location memory to review data or to re-write over an incorrect measurement.s1
PROGRAMMING
EDIT OR OVER-WRITE DATA
All data can be edited or over-written while testing. That is the case when a run must be repeated without increasing the memory location. It is sufficient to press once M- .
BATTERY CHARGER
Chrono Test is supplied with a re-chargeable battery which guarantees 8 hours of working time. A normal re- charge will take about 10-12 hours. CHARGING indicated on the display assures correct connection to supplies. To charge the battery use exclusively the charger furnished with your Crono Test. The tension required is from 110 to 230 Volt. Always check and assure that the plug matches the wall socket.
GUARANTEE
Chrono Test supplied with two reflectors, battery charger, and carry case is guaranteed for 24 months. STAR SKI WAX will substitute any defective parts; the guarantee is to be considered not valid if the instrument or its parts have been tampered or for negligence.
Din tilbakemelding på anmeldelsen kan ikke sendes inn
Rapporter kommentar
Rapporten er sendt
Din rapport kunne ikke sendes inn
Skriv din omtale
Anmeldelse sendt inn
Din anmeldelse kan ikke sendes inn
check_circle
check_circle